PUK VARI BOOST 3-120 (2 l/s @ 3 Bar) Water Booster Pump

<p>The PUK VARI BOOST 3-120 is a variable speed constant pressure booster pump that has been designed to suit systems that have unvented hot water cylinders with pressure reducing valves and high resistance bathroom fittings that require a balanced pressure on hot and cold supply pipes. This pump system is designed to boost cold-water pressure in both domestic and commercial applications.</p> <p><strong>Performance:</strong> 3 Bar = Up to 2 l/s | 120 l/m | 7.2 m³h</p> <hr> <p><img>We have integrated a Nasco Mida inverter to control the pump automatically and have enabled dry running protection should you have a water feed issue. the pre-fitted 8-litre pressure vessel ensures smooth running and reduces the run time of the pump. We use a WRAS approved pump and high-quality fittings to ensure water quality in potable water applications.</p> <hr> <p><a><img></a></p> <p>We build all of the PUK VARI COM booster sets in our Rochester (Kent, UK) workshop to order allowing us a high level of flexibility and to ensure all of our products are built to the highest standards.</p> <hr> <p>We test and pre-commission each unit before shipment so that installation is as simple as possible. All that is required is for your to bolt the pump in place, fit the inlet/outlet and turn on the power.</p> <p>For optimal operation, this pump should be connected to an adequately sized break tank so that the outlet flow rate will not drain the tank too quickly when the system is at full flow. To give a 5 minute storage time the minimum size for the tank would be 600 litres but ideally, we suggest a 750-litre tank.</p> <p><strong>Please Note:</strong> The pump pictured is shown fitted with union valves, these are not standard, please call to upgrade.</p>